From November 5th to 7th, 2024, the 7th Shenzhen Charging and Swapping Expo convened at the Shenzhen Futian Convention & Exhibition Center, bringing together over 800 industry-leading companies to showcase cutting-edge technologies. Jicheng Zhitong drew significant attention with its comprehensive product portfolio and innovative solutions, creating a vibrant atmosphere at its booth.
Executive Keynotes Garner Industry Recognition
Mr. Sun Xingwei, Deputy General Manager of Jicheng Zhitong, delivered a keynote speech titled "Applications of All-Scenario Smart Charging One-Stop Solution" at the main forum. He shared insights into urban charging infrastructure, highway networks, rural charging systems, and specialized vehicle solutions, highlighting the company’s technical expertise and industry-leading achievements.
On the afternoon of November 6th, at the seminar on "Integration and Interaction between Electric Vehicles and the New Power System" hosted by the National Key Project Team and the Electric Power Research Institute of State Grid Tianjin Electric Power Company, Mr. Wang Linxian, the General Manager of Jicheng Zhitong, made a presentation titled "Exploration on the Safety of High-power Charging Technology and the Application of Vehicle-to-Grid Interaction". He elaborated in detail on the key technologies of high-power charging, inspection standards, and relevant safety requirements. He explored how to effectively prevent and control the electrical safety risks brought about by a significant increase in power through technical means such as insulation design. He also discussed how to ensure thermal stability by using thermal management methods like heat dissipation and liquid cooling, so as to avoid the risk of thermal accumulation during the charging process. Finally, he delved into the discussion on the vehicle-to-grid interaction solutions and models in multiple scenarios, aiming to promote the application of vehicle-to-grid interaction demonstration projects.
Full Product Line Attracts Onsite Acclaim
Jicheng Zhitong showcased its complete suite of charging solutions, including: Fully Liquid-Cooled Flexible Charging & Discharging System, European Standard DC All-in-One Charger, Smart Mobile Charging Pile, Smart AC Charging Pile.
These products highlighted advancements in high-power charging, V2G integration, and photovoltaic-storage-charging-discharge systems, reflecting the company’s market responsiveness and technical leadership. Attendees expressed strong interest in the innovative features and practical applications of the exhibits.
Fully Liquid-Cooled Flexible Charging & Discharging System
—A high-power charging/discharging system featuring liquid-cooled heat dissipation power conversion units, supporting up to 720kW.
—Comprises a fully liquid-cooled main cabinet and charging/discharging terminals.
—Power conversion units use fully surface-mounted SIC power devices and film filter capacitors, combining with soft-switching control tech.
—System integrates advanced power electronics, automation control, and intelligent power scheduling, supporting flexible charging/discharging and dynamic power adjustment.
—Efficiency≥96%, supports 12 charging/discharging guns, with optional liquid-cooled or self-cooled terminals.
—Capable of high-power charging, V2G discharging, and integration with PV/storage systems.
European Standard DC All-in-One Charger
—The iES-ICS6260E series of European-standard DC chargers is specifically designed to be highly reliable and stable, supporting multiple charging standards such as CCS/CHAdeMO/GBT, etc.
—With an IP55 high protection design, it is fearless of harsh environments. It has a user-friendly interface and flexible expansion capabilities. The charging power can be easily configured from 60kW to 360kW, and it is compatible with a charging voltage range of 200V to 1000V.
—It provides all-round and multi-level protection to ensure charging safety.
—It is suitable for public charging stations. It can efficiently meet the diverse charging needs of electric taxis, electric logistics vehicles, electric buses, etc., and provide charging operators with efficient, economical, safe and convenient charging services.
Wall-Mounted European Standard DC Charging Pile
—Based on high-power density and ultra-wide constant power range conversion module, it offers higher safety and reliability. It adopts a new type of efficient three-phase PFC circuit topology, with a power factor greater than 0.99 and a total harmonic distortion rate as low as 5%.
—20kW, 30kW, and 40kW power output. Adopts thermal backup and hibernation technology to ensure the efficient operation of the system. The operating ambient temperature range is from -20°C to +50°C.
—Multiple charging methods can be selected, such as fixed-quantity charging, fixed-time charging, fixed-amount charging, fixed-duration charging, and automatic charging. It can display information such as the charging amount, charging time, current electricity price, charging cost, etc., as well as the operating status in real time.
—An RS-485 network communication interface is reserved, and the GPRS networking mode is optional. It’s power module supports hot-swapping technology, making maintenance more convenient.
—Multiple payment methods are available: QR code scanning, card swiping, mobile payment (such as the monthly subscription payment mode), and credit card payment (by swiping the card on a POS machine).
European Standard AC Charging Pile
—A new generation of high-end intelligent charging product launched for the overseas market. It integrates a digital tube liquid crystal display screen, which clearly shows the charging data.
—7kW, 11kW, and 22kW power output. Stable product performance. It supports 4G/5G communication, and the platform protocol supports OCPP1.6J.
—Multiple charging modes. Open for customized function development.
—Payment methods: card swiping, plug-and-charge, QR code scanning, etc.
—This serie of products features high integration, small size, exquisite appearance, easy installation, verification, and maintenance, and is suitable for various parking lots that require AC charging.
Smart Mobile Charging Pile
—Flexible and versatile, suitable for a variety of scenarios and can meet the charging needs of different users.
—The maximum output power is 90 kW, and the maximum input power is 120 kW (fully charged in about 1 hour).
—Uses CATL/Lithium Iron Phosphate batteries, which have high energy density and safety level.
—Equipped with a navigation system (DGPS+SLAM) to ensure accurate positioning and route planning.
—Driving recorder and ultrasonic sensors for safe driving and parking assistance.
—Protection level of IP54.
—Compact design. Minimum turning radius is 2.6 meters, maximum climbing ability is 20%, making it suitable for a variety of parking environments and terrains.
Home Smart AC Charging Pile
—The iES-ICS61217 series is a 7kW AC charging pile designed for home or parking lot charging.
—Supports 99% of the vehicle models on the market. Supports charging modes such as plug-and-charge, card-swiping, QR code scanning, and Bluetooth startup.
—The product has an IP66 protection level, and is equipped with multiple protection functions such as overvoltage, overcurrent, and short-circuit protection, as well as multiple charging safety protection functions such as overcharge amount and overcharge duration, ensuring safety and reliability.
The expo reinforced Jicheng Zhitong’s leading in the EV charging industry. By combining strategic insights with technological innovation, the company continues to push the frontier of technology development.
